Underbody Coating Pintyplus Auto
Protection of the underbody of your vehicle against stone and gravel impacts and environmental humidity
Pintyplus Auto Underbody Coating is a coating specifically designed to provide premium protection to the chassis and underbody of vehicles. Against corrosion, rust and damage from moisture, salt and grit, our Underbody Coating forms a thick, durable protective layer, ensuring optimal performance even in the most demanding conditions. Its special formulation and its ability to resist stone and gravel impacts make it the perfect ally for those looking for exceptional protection for the chassis of their vehicles.
- Chassis and lower parts of vehicles exposed to high humidity conditions.
- Cars that are driven in coastal areas or areas with a lot of salt on the roads.
- Vehicles used in environments with frequent impacts of stones and gravel.
Impact Protection: Our Underbody Coating provides a protective barrier against stone and gravel impacts, preventing damage to the underbody of the vehicle.
Duration: With a resistant and durable formula, this coating offers long-term protection, maintaining the integrity of the protected surface.
Moisture Resistance: Its ability to resist moisture and corrosion effectively protects the chassis and lower parts of the vehicle.
- Format: Available in 400ml/520cc.
- Performance: Covers up to 2m² of surface with one application.
- Total Dry: The coating dries fully in just 1 hour, allowing for a quick return to the road.
- Heat resistance: Up to 250º
- Shelf life: 10 years
Pintyplus Auto Underbody Coating is a premium spray designed for specialized applications that require exceptional performance.
Discover excellence in automotive protection with Pintyplus Auto Underbody Coating. Guarantee the integrity of your vehicle and enjoy worry-free driving in any environment. Ensure long-lasting protection for your car!
How to use the underbody coating
The surface to be painted must be clean, dry and free of any contaminants. Clean rust and scale, if any, with a wire brush. Remove grease stains with solvent.
Shake the aerosol vigorously for 1 minute after the mixing balls sound. Spray from a distance of 25/30 cm, applying thin, fast coats, first horizontally and then vertically. It is advisable to apply two thin coats and not one thick coat in order to achieve a uniform coverage and avoid sagging. Once the operation is finished, turn the can upsidedown and press until only gas comes out to clean the nozzle.
Recommendations for use
Do not use on equipment connected to the power supply and apply in ventilated areas.
Once empty, the aerosol should be deposited in the yellow container.