Pintyplus brake caliper spray paint provides the level of anchoring and heat resistance your car needs. Available in three colors: red, green and blue.<\/p>\n
Ideal to paint cars and motorcycles\u2019 brake calipers.<\/p>\n
To paint brake clippers with our aerosol, there is a method that we are pleased to recommend you to get a satisfactory result.<\/p>\n
First of all, we suggest you to clean the clippers from dirtiness and grease (we propose Pintyplus Brake Cleaner<\/em> which was designed especially to reach all the corners).<\/p>\n In painted surfaces, a light sanding is necessary to prepare and smooth the area in order to improve adhesion. If the previous paint is in a poor state, it will have to be removed. In that case, we recommend to dismantle and strip the paint with\u00a0 Greenox stripping spray<\/em> which you can also find in this wide aerosol family or another similar one and clean them with Pintyplus brake cleaner <\/em>before painting again.<\/p>\n In case you are able to remove the calipers to polish them, much better. Otherwise, do not worry because you can cover the area that is not going to be painted with masking tape, plastic, paper or aluminum foil. Make sure the paint won’t go to seep underneath.<\/p>\n Shake the can vigorously during 1 minute while the mixing balls sound. Once you finish shaking, \u00a0spray thin layers until full coverage. You can repeat the process only within the first 60 minutes or else, you will have to do it after a few days. This is due to the paint features since it requires a slow dry to resist tension and calipers heat.<\/p>\n We recommend thin layers instead of thick to avoid overloading the caliper.<\/p>\n After use clean the nozzle by turning the aerosol upside down and spray until gas only will emerge<\/p>\nRecommendations for the use of Pintyplus Brake Caliper spray<\/h2>\n