Pintyplus Evolution WATER-BASED Primer

Pintyplus Evolution Water-Based Primer is a product developed to provide anchoring to surfaces and prepare them to be painted. The presence of harmful solvents has been reduced to the minimum, giving off no odors. Making it an ideal product to be used indoors.

It is a multipurpose primer: valid for any use and any surface, suitable with both, Pintyplus Evolution and Pintyplus Evolution Water-Based.

Applications for Pintyplus Evolution Water-Based Primer

To achieve anchoring on slightly porous surfaces where the paint needs a primer to perform at its best. Furthermore, on porous surfaces, the primer will fill the pores preventing the end consumer from applying more layers of paint.

Technical Characteristics

• Size 520/400ml.
• Spreading 2 m2.
• Total dry in 1h.
• Repainted after 1h.
• Matte finish RAL 9010.
• Shelf life: 10 years.

How to use Evolution Water-Based Primer

Clean the surface to be primed, use a solvent to remove grease stains. The surface must be clean, dry, and free of any contaminants.

Shake the can vigorously for 1 minute after hearing the mixing balls. Spray from a distance of 25/30cm, applying thin and uniform layers. A thin coat is enough to achieve the desired effect.

Once the operation is completed turn the container upside down and press the nozzle until only gas comes out to prevent nozzle clogging.

Recommendations for use of  Pintyplus Evolution Water-Based Primer

Before painting on previously painted surfaces, the surface should be sanded to make adhesion easier. If the previous coat of paint needs to be completely removed, continue with a stronger sanding or use a stripping product such as Tech Paint Stripper. It will be convenient to wait until the stripper has evaporated to avoid incompatibility between products.

Do not use on devices connected to the electrical network and apply in ventilated areas.

Once empty, the can should be deposited in the yellow container.