GESSO PRIMER spray Pintyplus
The gesso primer spray Pintyplus is very suitable to prepare the surface to be painted with all kinds of paints. Color white matte.
Applications of the gesso
Allows gaining adhesion on different types of absorbent surfaces, with or without relief, like canvas (cotton, linen, polyester), wood, plywood, plasterboard, cardboard, paper mâché, walls and concrete. Once dry, it can be painted immediately. Washable with soap and water within the first few minutes.
In order to get a smooth surface finish, apply several thin coats, let it dry and sand it lightly until you archive the desired texture. Applied on large surface areas, it performs like a filler and sealer, thereby reducing the necessary amount of paint to be sprayed.
- Size 520/400ml
- Spreading = 2 m2
- Drying time 30 minutes. Total 24 hours.
How to apply the Gesso primer spray Pintyplus
The surface to be painted must be clean, dry and free of any contaminants.
Shake the can vigorously during 1 minute after the mixing balls sound. Spray from a distance of 25/30 cm, applying thin and quick layers, first horizontally and then vertically. It is advisable to spray two thin layers instead of one thick layer in order to obtain uniform coverage and avoid paint sags.
Once the operation is completed reverse the can and push the nozzle until only gas comes out in order to prevent nozzle clogging.
Tip for the Gesso primer in spray
On painted surfaces, if properly adhered proceed with a light sanding to facilitate adherence, and if poorly adhered, remove it.
Test prior to use on a sample or fragment of the field to be used to prevent incompatibilities.
Start and finish spraying outside the limits of the work.
Do not use on devices connected to the electrical network and apply in ventilated areas.
Once empty, the spray must be deposited in the yellow container.