Pintyplus Art&Craft Mirror Effect

Pintyplus Art MIRROR EFFECT paint

If the surface is made of glass, acrylic glass or similar materials, the Pintyplus mirror effect paint turns the painted surface into a mirror-like effect. Over opaque surfaces it achieves a high glossy silver effect.

Applications for Pintyplus Art Mirror Effect paint

Pintyplus Art&Craft mirror effect has been developed for the crafts and fine arts sector to achieve an amazing mirror effect finish on glass, acrylic glass and similar supports. The look is achieved by spraying the reverse side of the surface to create a reflective mirror-like finish.

It is recommended to apply it on very smooth surfaces.

In order to achieve the desired mirror-like effect, apply only the product without priming the surface.

Technical characteristics

  • Format: 400/520ml
  • Spreading: 2 m2
  • Total drying time: 5 minutes
  • Re-painting: after 2 minutes (each layer)

Mirror Effect Paint

How to apply Pintyplus Art Mirror Effect Paint

The surface to be painted must be clean, dry and free of any contaminants. Shake the can vigorously for 1 minute after the mixing balls sound. Spray from 20cm distance, applying thin and quick layers, first horizontal and then vertically.

After use. Clean the nozzle by turning the aerosol upside down and spray until only gas comes out.

Recommendations for use

Apply several thin layers, waiting a few seconds between each application. In order to get optimal results and avoid paint drippings, it is recommended to paint at a leisurely pace.

Do not use on devices connected to the electrical network and apply in ventilated areas.

Once empty, the aerosol must be deposited in the yellow container.