Pintyplus Evolution Water-Based Primer Spray
Pintyplus Evolution Water-Based Primer Spray is a product designed to provide adhesion to surfaces that will later be painted. It reduces the presence of harmful solvents to almost a minimum. It is odorless. Ideal for indoor work.
It is universal: suitable for any use and on any surface. It is valid as a primer for Pintyplus Evolution and Pintyplus Evolution Water Based.
Applications of the water-based primer spray
To achieve adhesion on less porous surfaces where the paint needs a primer to perform at its best. Also for very porous surfaces: in this case, the primer will fill the pores to use less paint when the primed surface is painted.
RAL 9010 Pure White
Technical Characteristics
- Format: 520/400ml.
- Yield: 2 m².
- Fully dry: 1h.
- Repaintable after 1h.
- Shelf life: 10 years
- Matte finish RAL 9010
How to use the acrylic spray paint
Clean dirt from the surface to be primed. Remove grease stains with solvent. The surface to be painted must be clean, dry, and free of any contaminants.
Shake the aerosol vigorously for 1 minute after the mixing balls sound. Spray at a distance of 30/35 cm, applying light and even passes. A thin layer of primer will be sufficient to achieve the desired effects.
Once the operation is finished, invert the can and press until only gas comes out to clean the nozzle.
Recommendations
On already painted surfaces, if they are well adhered, proceed with light sanding to facilitate adhesion, and if they are poorly adhered, remove them. To facilitate cleaning of paint residues from the surface, we recommend using the Pintyplus Tech Stripper. It will be convenient to wait for the stripper to evaporate to avoid product incompatibilities.
Do not use on equipment connected to the power supply and apply in well-ventilated areas.
Once empty, the aerosol should be disposed of in the yellow container.