Pintyplus Auto filler spray
The Pintyplus filler in spray is an acrylic white putty which repairs the surface before painting it. It acts as a primer in order to unify and seal the surface by sanding it.
Applications of the filler in spray
Very easy to apply, it is ideal for body penels and other devices for small repairs, leveling, sealing scratches or sanding prints. A smooth surface is obtained for subsequent painting.
Creates a thick layer, protects against the corrosion, very fast drying time and an excellent adhesion on iron sheet, aluminum, polyurethane, putty and on most plastics or similar substrates. It has a great sealing power and is very flexible. This recoatable putty is compatible with most of the paints (acrylic, synthetic, of one and of two components, water or solvent based …).
- Size 520/400ml
- Drying time and repainted after 20 min.
Easy sanding in both dry and wet.
How to use the filler in spray
The surface to be painted must be clean and dry.
Shake the can vigorously during 1 minute after hearing the sound of the mixing balls inside. Apply from a distance of 25/30 cm., applying thin and fast layers, first horizontally and then vertically. It is advisable to give two thin coats rather than a thick one in order to achieve a uniform coverage and avoid paint drippings.
Once the operation is completed, reverse the can and press until only gas comes out for further usage.
With the filler primer applied on the surface, let it dry 15 minutes and sand the surface for unifying and leveling it if necessary. Once finished, clean well and paint normally with the desired paint.
Recommendations for use
Do not use on devices connected to the electrical network and apply in ventilated areas.
Once empty, the spray must be deposited in the yellow container.
Actual color may vary from on-screen representation. To confirm your color choices prior to purchase, please view a physical color chart made with stickers painted with real paint, color card, or painted sample available at your local point of sale.