Stainless Primer spray Pintyplus Tech

Stainless primer spray Pintyplus, acrylic and anticorrosive.

Pintyplus Tech Inox Primer is a gloss finish product with a stainless steel appearance. Ideal for coating stainless steel welds, storage tanks, structural steel, fences, etc.

Its main features are

• Size 520/400ml
• Performance = 2 m²
• Drying time in 30 minutes.
• Repaint time in 30 minutes.

How to use Inox Primer

• Remove rust and scale, if any, using a wire brush. Remove grease stains with solvent. The surface to be painted must be clean, dry, and free from any contaminants.

• Shake the can vigorously for 1 minute after the mixing balls sound.
• Spray at a distance of 25/30 cm, applying thin and quick coats, first horizontally and then vertically. It is recommended to apply two thin coats rather than one thick coat to achieve uniform coverage and avoid drips.
• Once finished, turn the can upside down and spray until only gas comes out to clean the nozzle.

On already painted surfaces, if they are well adhered, sand lightly to improve adhesion; if they are poorly adhered, remove them. To help clean off paint residues, we recommend using Tech Paint Remover.

Do not use on devices connected to power and apply in well-ventilated areas.

Once empty, the aerosol should be disposed of in the yellow container.